Polymer Compounds

Processing capabilities with large selection of rubber types

Polymer Compunds - large selection of rubber types
Process Capabilities
  • Fully automatic, PC/PLC based control systems
  • Recipes locked and controlled
  • Raw material changes control
Production Batches

Depending on specific gravity batch sizes ranges between 500 and 700 lbs.

Design element for Nitrile (NBR)
Nitrile (NBR)

Used where oil resistance is desired, can be easily blended with other polymers

Design element for Polychloroprene (CR)
Polychloroprene (CR)

Use where flame resistance and resistance to oils

Design element for Natural Rubber (NR)
Natural Rubber (NR)

Excellent general purpose renewable polymer with good elastic and tensile properties

Design element for Styrene Butadiene Rubber (SBR)
Styrene Butadiene Rubber (SBR)

Good general purpose rubber with good abrasion resistance, can easily be blended with other polymers

Design element for Polyisoprene

Synthetic analog of Natural Rubber

Design element for PVC/Nitrile

Good resistance to oils and ozone

Design element for EPDM

Excellent ozone resistance

Design element for Chlorobutyl and Bromobutyl
Chlorobutyl and Bromobutyl

Excellent resistance to water and air permeation, low levels of extractables

Design element for Butyl
Design element for Hypalon
Design element for Chloroprene